beautypg.com

Red Lion G3MPI User Manual

General description, Safety summary, Contents of package

background image

1

GENERAL DESCRIPTION

The G3 proprietary expansion slot provides a high speed, parallel architecture

that extends the functionality and flexibility of the G3 series HMI. This
approach allows the G3 series to evolve concurrently with the latest advances in
communications and standards, without sacrificing performance. This high
bandwidth channel has significantly greater throughput when compared to the
traditional (external) serial gateway approach.

The G3MPI option card adds Multi Point Interface connectivity to any G3

series HMI. This allows a high speed exchange of data, at data rates up to 12
MBaud, between the hosting G3 and a PLC on an MPI network.

The card is easily installed by removing the rear cover of your G3 operator

interface, attaching the card using three screws and connecting a single cable.

SAFETY SUMMARY

All safety related regulations, local codes and instructions that appear in the

literature or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.

Do not use the controller to directly command motors, valves, or other

actuators not equipped with safeguards. To do so can be potentially harmful to
persons or equipment in the event of a fault to the controller.

CONTENTS OF PACKAGE

- G3MPI Option Card with pluggable DB9F connector
- Cable already attached to G3MPI option card
- Hardware pack consisting of three screws
- This hardware bulletin

ORDERING INFORMATION

MODEL NO.

DESCRIPTION

PART NUMBER

G3MPI

Multi Point Interface Option Card For G3
Operator Interfaces

G3MPI000

MODEL G3MPI - MULTI POINT INTERFACE OPTION CARD FOR G3
OPERATOR

INTERFACE

TERMINALS

CAUTION: Risk of Danger.

Read complete instructions prior to

installation and operation of the unit.

Connector
(side 2)

mounting holes, 3 plcs.

 ADDS MPI MULTI POINT INTERFACE CONNECTIVITY TO ANY

G3 OPERATOR INTERFACE

 POWERED BY THE G3 OPERATOR INTERFACE

 INSTALLATION AND CONNECTION HARDWARE INCLUDED

WITH CARD

NOTICE

This product does not have a UL rating. Installing Non-UL Rated parts

or components into any UL Rated device voids the original UL rating on
that device.

Bulletin No. G3MPI-X
Drawing No. LP0868
Effective 03/11

Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net