Red Lion GEMINI 52 - Manual (Page 49)

-47-
APPENDIX “E” - GEMINI 5200 DUAL RATE W/ DISP C FUNCTION COMMAND CODE SUMMARY
CODE MODE DESCRIPTION COMMENTS
46 DISPLAY C DECIMAL POINT & LEAD ZERO BLNKNG
(Cont’d)
+/-2 Decimal Point Right of Digit 2
+/-3 Decimal Point Right of Digit 3
+/-4 Decimal Point Right of Digit 4
+/-5 Decimal Point Right of Digit 5
+/-6 Decimal Point Right of Digit 6
51 OUTPUT ASSIGNMENT
(+) Preset Tracking disabled
(-) Preset Tracking enabled* Preset 1 tracks Preset 2
+/-1 Output 1 to Rate A, Output 2 to Rate B
+/-2 Outputs 1 & 2 to Rate B
+/-3 Outputs 1 & 2 to Rate A
+/-4 Output 1 to Rate B, Output 2 to Display C
+/-5 Output 1 to Rate A, Output 2 to Display C
+/-6 Outputs 1 & 2 to Display C
52 OUTPUT 1 TERMINATION MODES
(+) Normal Phase Output normally “OFF”, turns “ON” at preset.
(-) Reverse Phase* Output normally “ON”, turns “OFF” at preset.
+/-3 Terminate at Manual Reset
+/-4 Terminate at Manual Reset End
+/-5 Terminate after Timed Output 1
+/-6 Boundary
53 TIMED OUTPUT 1 VALUE Range 0.01 to 599.99 sec.
54 OUTPUT 2 TERMINATION MODES
(+) Normal Phase Output normally “OFF”, turns “ON” at preset.
(-) Reverse Phase* Output normally “ON”, turns “OFF” at preset.
+/-3 Terminate at Manual Reset
+/-4 Terminate at Manual Reset End
+/-5 Terminate after Timed Output 2
+/-6 Boundary
* Polarity sign is displayed in front of the identifier, a (-) sign is displayed, a (+) sign is not.