HP Insight Management Agents - Manual (Page 64)

Temperature Information
This information is not available for all types of storage systems.
• Description displays the description of the temperature sensor. The following values are
possible:
— Fan Bay - This temperature sensor is located on the fan module in the fan bay.
— Backplane - This temperature sensor is located on the SCSI drive backplane.
— Unknown - The Storage Agents are unable to determine the location of this storage
system temperature sensor.
• Status displays the status of the temperature sensor. The following values are possible:
— OK - The temperature is OK.
— Degraded - The temperature is degraded.
— Failed - The temperature is failed.
— Unknown - The Storage Agents are unable to determine the storage system temperature
sensor status.
• Current Value displays the current temperature value.
• Limit Value displays the threshold value of the temperature sensor.
Fan Information
This information is not available for all types of storage systems.
• Description displays the description of the fan module. The following values are possible:
— Fan Bay 1 - This fan module is installed in the first fan bay.
— Fan Bay 2 - This fan module is installed in the second fan bay.
— Fans - This is a composite of all the installed fan modules.
— Unknown - The Storage Agents are unable to determine the location of this storage
system fan module.
• Status displays the status of the fan module. The following values are possible:
— OK - The fan module is installed and operating normally.
— Degraded - The fan module degraded.
— Failed - The fan module is failed. Replace the fan module.
— Not Installed - The fan module is not installed.
— Unknown - The Storage Agent is unable to determine if this storage system fan module
is installed.
• Serial Number displays the serial number for the fan module. Use this information for
identification purposes.
• Board Revision displays the board revision of the fan module.
Array Controller Information
This section displays the following information about array controllers that are installed in a
storage system.
• Model displays the model name of the controller card.
• Firmware Version displays the version of the controller's firmware.
• Serial Number displays the serial number of the controller. Use this information for
identification purposes.
• Product Revision displays the product revision of the controller. Use this value to further
identify a particular revision of the controller model.
• World Wide Port Name displays the unique Fibre Channel port name for the controller. Use
this value to further identify a particular controller.
64 Agent information