HP Insight Management Agents - Manual (Page 104)

Advanced Memory Protection (AMP)
This section displays the following information about the Advanced Memory Protection
sub-system.
• AMP Mode Status—Displays status of the Advanced Memory Protection sub-system. The
following states are supported:
— Other / Unknown—The system does not support Advanced Memory Protection or the
Management Agent cannot determine the status.
— Not Protected—This system supports Advanced Memory Protection but the feature is
disabled.
— Protected—The system supports Advanced Memory Protection. The feature is enabled
but not engaged.
— Degraded—The system was protected, but the Advanced Memory Protection has been
engaged; therefore Advanced Memory Protection is no longer available. No DIMM
faults have been detected.
— DIMM ECC—The system is protected via DIMM ECC only.
— Mirroring—The system is protected by Advanced Memory Protection in the mirrored
mode. No DIMM faults have been detected.
— Degraded Mirroring—The system is protected by Advanced Memory Protection in the
mirrored mode. One or more DIMM faults have been detected.
— Online Spare—The system is protected by Advanced Memory Protection in the Online
Spare mode.
— Degraded Online Spare—The system is protected by Advanced Memory Protection in
the Online Spare mode. One or more DIMM faults have been detected.
— RAID-XOR—The system is protected by Advanced Memory Protection in the RAID-XOR
memory mode. No DIMM faults have been detected.
— Degraded RAID-XOR—The system is protected by Advanced Memory Protection in
the RAID-XOR memory mode. One or more DIMM faults have been detected.
— Advanced ECC—The system is protected by Advanced Memory Protection in the
Advanced ECC mode.
— Degraded Advanced ECC—The system is protected by Advanced Memory Protection
in the Advanced ECC mode. One or more DIMM faults have been detected.
— LockStep—The system is protected by Advanced Memory Protection in the LockStep
mode.
— Degraded LockStep—The system is protected by Advanced Memory Protection in the
LockStep mode. One or more DIMM faults have been detected.
• AMP Mode Available—Displays the options available:
— RAID-XOR—This system can be configured for Advanced Memory Protection using
the RAID-XOR engine.
— Dual Board Mirroring—This system can be configured for Mirrored Advanced Memory
Protection within a dual memory board configuration. The mirrored memory may be
swapped with memory on the same memory board or with memory on the second
memory board.
— Single Board Mirroring—This system can be configured for Mirrored Advanced Memory
Protection within a single memory board.
— Advanced ECC—This system can be configured for the Advanced ECC type of Advanced
Memory Protection.
— Mirroring (deprecated)—This system can be configured for Mirrored Advanced Memory
Protection.
— Online Spare—This system can be configured for Online Spare Advanced Memory
Protection.
104 Agent information