HP Insight Management Agents - Manual (Page 14)

root 12278 1 0.0 ... /usr/sbin/cpqthresh_mib
root 12278 1 0.0 ... /var/opt/CPQIM100/bin/cpqthresh_mib
Use the path name displayed in the output of the ps command to locate the WEBAGENT.INI file
on your system as follows:
• The WEBAGENT.INI file is located in the directory /var/im/webagent if the pathname is
/usr/sbin/cpqthresh_mib.
• The WEBAGENT.INI file is located in the directory /var/opt/CPQIMddd/web/im/webagent
if the pathname is /var/opt/CPQIMddd/bin/cpqthresh_mib, where the value ddd indicates
the version of the Management Agents installed on the system.
The Web Agent service must be stopped and restarted for any changes to take effect for Tru64
UNIX operating systems.
Deploying the configurations to servers running Linux
The configuration settings for the Management HTTP Server are stored in three files. The
passwords for the Management HTTP Server are stored in /var/spool/compaq/wbem/
cpqhmmd.acl
.
The configuration settings for the Management HTTP Server that existed through version 3.x is
stored in /var/spool/compaq/wbem/homepage/cpqhmmd.ini.
The configuration settings for the Management HTTP Server that were introduced in version
4.x and later are stored in /var/spool/compaq/wbem/homepage/cpqhmmdx.ini.
To deploy the Management HTTP Server configuration to other servers, copy the corresponding
ACL file and INI files previously listed.
Three types of data exists:
• Default (read only)
• Sets (read/write)
• Reboot (read/write).
The .INI files located in /opt/compaq/webagent are the configuration files used by the
Web-Enabled HP Insight Management Agents.
Deploying the configurations to servers running NetWare
In NetWare, the webagent.INI file is located in the sys:\system\cpqmgmt\webagent
directory and specifies the level of a user with access to data. The “read=” and “write=” entries
in the file set the user accounts required for access:
• 0 = No access
• 1 = anonymous
• 2 = user
• 3 = operator
• 4 = administrator
Changing these entries changes the security.
The Web Agent service must be stopped and restarted for any changes to take effect. Do not
modify anything except the read/write levels to change the security.
Management HTTP Server first-time initialization
Introduction
The System Management Homepage is the one-stop-centralized simple view for all the
management information and configuration data generated by Web-Enabled System Management
software and utilities. The status of the management software and utilities installed on the system
14 HP Insight Management Agents for Servers