HP Insight Management Agents - Manual (Page 31)

— Offline pending—The resource is in the process of going offline.
— Failed—The resource has failed.
— Unknown—The resource has not responded and the exact state is undetermined.
• Type—Displays the resource type, which is acquired from the cluster service.
• Owner—Displays the name of the node in the cluster that currently owns this resource.
• Identification—Displays information based on the resource type. If the type is Physical Disk,
identification displays the drive letter, the physical identification, and the logical drive
number. For disks, this is the physical ID entered at the server for this disk or the serial
number if nothing was entered. If the type is IP Address, then the IP address appears. Any
other resource type displays N/A.
Cluster networks
The Cluster Network section displays the following information about the networks connected
to the cluster nodes:
• Name—Displays the name of the network.
• Role—Displays how the network is used for communication by the cluster, which can be one
of the following:
— Internal—The network is used for internal cluster communication.
— Client—The network is used to connect client systems to the cluster.
— Client/Internal—The network is used to connect client systems and for internal cluster
communication.
— None—The network is not used by the cluster for communication.
• State—Displays the current state of the network, which can be one of the following:
— Online—The network is online and functioning normally.
— Offline—The network is offline.
— Partitioned—The network is operational, but two or more nodes on the network cannot
communicate. Typically, a path-specific problem has occurred.
— Unavailable—The network is unavailable to the cluster because the role of the network
is None.
— Unknown—The network has not yet responded and the exact state is undetermined.
• Address Mask—Displays the address mask used by the network in the format specified by
the transport type.
• Description—Displays the text network description if one was entered.
Cluster interconnect
The Cluster Interconnect section displays the following information about the adapters used for
cluster interconnections:
• Network—Displays the name of the network.
• Address—Displays the address used by the interconnect in the format specified by the
transport type.
• Transport—Displays the network transport protocol used by the interconnect.
• Node—Displays the name of the system in which the adapter is installed.
• Physical ID—Displays the physical identification of the interface card including the name,
the slot number, and base I/O address, if available.
Cluster software
The Cluster Software section displays the file name, version number, and description of the HP
Insight Management Agents cluster software.
System Agent 31