HP Insight Management Agents - Manual (Page 65)

• World Wide Node Name displays the unique Fibre Channel node name for the controller.
Use this value to further identify a particular controller.
• Rebuild Priority displays the logical drive rebuild priority of the controller. The following
values are valid:
— Low - indicates the rebuild priority is low.
— Medium - indicates the rebuild priority is medium.
— High - indicates the rebuild priority is high.
— Unknown - indicates that the rebuild priority is not recognized. You may need to
upgrade the Storage Agents.
• Expand Priority displays the logical drive expand priority of the controller. The following
values are valid:
— Low - indicates the expand priority is low.
— Medium - indicates the expand priority is medium.
— High - indicates the expand priority is high.
— Unknown - indicates that the expand priority is not recognized. You may need to
upgrade the Storage Agents.
• Controller Status displays the status of the controller hardware. The following values are
valid:
— OK - The controller is operating normally.
— Failed - The controller has failed and is no longer operating.
— Offline - The controller is offline.
— Redundant Path Offline - There are multiple connection paths to this controller. At least
one connection path is available and at least one connection path is not available.
— Unknown - Indicates that the Storage Agents are unable to determine the status of the
controller. You may need to upgrade the Storage Agents.
• Current Role displays the array controller's current role for duplexed array controllers. The
following values are valid:
— Not Duplexed - This array controller is not duplexed.
— Active - This duplexed array controller is the active controller.
— Backup - This duplexed array controller is the backup controller.
— Unknown - Indicates that the Storage Agents are unable to determine the role of the
controller. You may need to upgrade the Storage Agents.
• Redundancy Type displays the type of redundant configuration. The following values are
valid:
— Not Redundant - This array controller is not in a redundant configuration.
— Firmware Active/Standby - The array controller is using an active/standby algorithm
implemented in the controller firmware and the operating system driver.
— Firmware Primary/Secondary - The array controller is using a primary/secondary
algorithm implemented in the controller firmware and the operating system driver.
— Unknown - Indicates that the Storage Agents are unable to determine the type of
redundancy for the controller. You may need to upgrade the Storage Agents.
• Redundancy Error displays the redundancy error for the controller. The following values
are valid:
— No Failure - No failures have been detected.
— No Redundant Controller - No redundant controller is installed.
— Different Hardware - The other controller indicates a different hardware model.
— No Link - A link to the other controller could not be established.
— Different Firmware - The other controller indicates a different firmware version.
— Different Cache - The other controller indicates a different cache size.
Storage Agent 65