HP Compaq StorageWorks TL881 DLT Mini-Library - Manual (Page 85)

3-16 Compaq TL881 Minilibrary System Users Guide
Rack Slide Separation:
1. Refer to Figure 3-10. Pull the outer slide toward the rear, along with the
intermediate slide until the inner slide lock engages the intermediate
slide.
1
SHR-1241
Figure 3-10. Separating a Rack Slide
1 Inner slide lock
2. Continue to pull the outer slide towards the rear until the outer slide lock
engages the intermediate slide. Press down on the inner slide lock to
permit the intermediate slide to continue to move toward the rear.
Continue to move the outer and intermediate slides toward the rear until
they are separated from the inner slide.
3. Identify and orient the parts of the slides and hardware needed for your
specific rack type. Figure 3-11 shows the parts required for Standard
EIA/RETMA rackmounting and Figure 3-12 shows the parts for
rackmounting into a StorageWorks metric rack.