HP Compaq StorageWorks TL881 DLT Mini-Library - Manual (Page 116)

Chapter
4
Configuration
Configuration Overview
This chapter describes how to customize the configuration of the MiniLibrary
Base Module and defines configuration options.
The MiniLibrary Base Module is designed with several configuration options,
each offering multiple settings to support a variety of applications and
platforms. The setting of each option is stored in non-volatile memory in the
module. For most applications, you will not need to change the factory default
settings. If you need to change the configuration, go on to the next section. If
you are uncertain whether you need to change a setting, contact your
Technical Support representative.
To change settings, you need to use the Control Panel. For an overview of how
the Control Panel works, and a description of the functions of the buttons,
indicators and display, refer to the sections entitled Entering the Menu Mode,
Exiting the Menu Mode, and Navigating Through the Menu Structure, in
Chapter 2, Operation.
The settings can be changed using the procedure described below under How
to Customize Configuration. Before changing any configuration settings,
consult your host system documentation to determine which settings may need
to be changed.
Customizing Your Configuration
To customize your configuration: Turn the module on and wait for the Power-
On Self Test (POST) to terminate and the default screen to appear on the