HP Compaq StorageWorks TL881 DLT Mini-Library - Manual (Page 49)

Operation 2-23
SHR-1356
Figure 2-26. Code Validate Submenu
Press the Enter button to validate your choice. If the code is correct, the Main
Menu is displayed. If the code is incorrect, an error screen appears. If you have
forgotten your unlock code, contact your technical support representative for
assistance.
Displaying Firmware Revision
You may display the library robotics firmware revision at any time by pressing
the
Escape button at the Default Screen to display the Show Status Menu. It
appears as one of the items on the Library Status submenu of the Show Status
Menu. Press Enter with the arrow next to Library and the revision is shown;
press Escape to bring back the Default screen.. It is also displayed on line 2
of the POST Screen and the Initialization Screens.
Displaying Error Logs
To display the error history of the module, you need to use the Show History
Menu. Access it as follows:
SHR-1357
Figure 2-27. Error History Screen
Loading and Unloading Tapes
The Load/Unload menus enable you to specify a source and a destination for a
cartridge movement. As a result, you use exactly the same procedure to load
and unload. To load or unload a tape from the front panel of the module, use
the Load/Unload menus as follows: