HP Compaq StorageWorks TL881 DLT Mini-Library - Manual (Page 184)

Appendix
E
Information on Pass-Through Section
Covers
Introduction
This appendix supplements the information in the section Mechanical
Installation in Chapter 3.
IMPORTANT: These procedures should be performed by a qualified service technician.
Pass-Thru Mechanism Section Covers
The Pass-Thru mechanism moves tape cartridges vertically between TL881
MiniLibrary modules. Each module section is covered by an individual sheet-
metal enclosure. These covers protect the mechanism during shipping and are
an important safety shield during operation.
A separate detachable side plate is part of the cover assembly. During
installation the side plates should be removed on any mechanism sections
located behind a MiniLibrary module; this allows easy access to a cartridge
stranded in transit by a commercial power outage. The remaining portion of
the cover can be removed also from any section behind a module.
IMPORTANT: Both parts of the covers must remain in place over any section of the
mechanism that is not behind a MiniLibrary module. Any gaps between modules should
remain completely covered.