HP Compaq StorageWorks TL881 DLT Mini-Library - Manual (Page 46)

2-20 Compaq TL881 Minilibrary System Users Guide
SHR-1450
Figure 2-20. Map Info Submenu
The list of locations available for display on line 1 is as follows. If you do not
designate any mail slots, those lines are omitted from the list.
Depending on the report for each location, Line 2 may display either ‘Empty’,
or ‘Occupied’, or, if a magazine is absent, ‘Not Installed'.
Depending on the report for each location, Line 3 may display either ‘Label
Valid’, or ‘Label Not Present'.
For each location reported, Line 4 will display the actual bar code on the label,
up to 8 characters.
Maintenance Menu
The Maintenance Menu and the options under it that are intended for operator
use are described in Chapter 5, Regular Maintenance.
Configure Menu
The Configure Menu, how to use it and the options available under it are
described in Chapter 3, Installation.
Show History Menu
The Show History Menu enables the operator to review the history of the
system. An example of the use of the Show History Menu appears later in this
chapter under the heading ‘Displaying Error Logs'. You can retrieve the
configuration history, the original configuration, as well as statistics on the
number of operations the library robotics and the drives have performed.
Security Menu
The Security Menu permits the operator to lock the control panel, preventing
inadvertent or unauthorized access to the Menu Mode, which takes the system
offline. You can display the Show Status Menu without unlocking the panel