HP Compaq StorageWorks TL881 DLT Mini-Library User Manual

Page 106

Installation 3-37

Figure 3-30. Set Mail Slot Submenu

With the

next to line 1, press the

Enter

button. The

moves to line

2 and

appears at the end of line 4. Now you can use the

and

buttons to scroll line 2 to display the possible settings. These options
enable you to specify which module should have the mail slot enabled.
Scroll downward to the desired module, then press the

Enter

button to

save the new selection.

NOTE: The Expansion Unit is not on the list. Module 1 refers to the MiniLibrary Base
Module just below it.

Scroll line 2 to display Module 1, then press the

Enter

button to select it.

The screen changes as shown in Figure 3-31:

SHR-1341

Figure 3-31. Set Mail Slot Submenu Enabled

The

returns to line 1. Press the

button. The

moves to line 3.

Press the

Enter

button The

moves to line 4. Now you can use the

and

buttons to scroll line 4 to specify how many slots will be

designated as mail slots. Scroll to the desired number, then press the

Enter

button to save the new selection

Press the

Escape

button repeatedly to return to the Default Screen.

Reserved Slots

Some host software imposes size limits on tape library magazines for licensing
purposes, and will not operate with a library that exceeds the licensed size.
This configuration option enables you to withdraw some of the slots in the
Expansion Unit from use as storage slots in order to meet licensing
requirements.

As shown in Figures 3-25 through 3-27, navigate from the Default
Screen through the Main Menu to the Configure Submenu.

Scroll down on the Configure Submenu until you see ‘Set Reserved
Slots’, and select that option. The screen shown in Figure 3-32 appears: