HP Compaq StorageWorks TL881 DLT Mini-Library User Manual

Page 104

Installation 3-35

SHR-1332

Figure 3-27. Configure Submenu

To select a configuration option, press the

button on the control

panel until the

on the display is next to the option you want to

change. In this case, let us choose Set SCSI. Press the

Enter

button to

display the choices for that option. The submenu in Figure 3-28 appears:

SHR-1456

Figure 3-28. Set SCSI Submenu

NOTE: Take a moment to look closely at the submenu in Figure 3-28. Note that the

the display is next to line 1,

and that line 2 is indented. This tells you that Figure 3-28 is a

two-tiered menu. The

and

buttons work on two levels in this kind of menu, which

is typical of many submenus of the Configure Menu. The first level is as follows: If you
press the

button, the

moves to line 3. If you press the

button, the

moves

back to line 1.

If you press the

Enter

button while the

is next to line 1 (or line 3), the

and

buttons operate on the second level. You can tell because the

moves next to line 2 (or

line 4), and a

appears at the end of line 4, indicating that there is a list of settings that

can be scrolled using the

and

buttons.

The

at the end of line 4 means that there are other items that can be displayed by

scrolling, using the

button repeatedly.

Note that the Library SCSI ID is set to 0. Suppose you want to set the
DLT0 bus ID to 3. With the

next to line 1, press the

button

repeatedly until the display scrolls as shown in Figure 3-29: