HP Compaq StorageWorks TL881 DLT Mini-Library - Manual (Page 42)

2-16 Compaq TL881 Minilibrary System Users Guide
Entering Menu Mode
IMPORTANT: When the Expansion Unit enters the Menu Mode, the Ready light goes
out. This means that the module is offline, and responds to all commands from the host
with a SCSI ‘Not Ready’ until you exit the Menu Mode and the Ready light goes on.
To prevent accidental interruption of host operations, you can lock out the
Menu Mode using the Security Menu. See the section entitled Security Menu,
later in this chapter. When all control panels are locked, you must enter your
unlock code in order to display the Main Menu. Note that the Show Status
Menu of each module remains accessible. It may be displayed from the
module’s Default Screen at any time by pressing the
Escape button.
When the Default Screen appears on the screen, you can enter the Menu Mode
by pressing the
Enter button. The Main Menu shown in Figure 2–13 appears:
SHR-1331
Figure 2-14. Main Menu
NOTE: If the control panel has been locked, the screen shown in Figure 2–14 appears
instead of Figure 2–13. You must know the unlock code for the system before you can
proceed.
SHR-1347
Figure 2-15. Panel Locked Screen
When you press the Enter button, the screen shown in Figure 2–15 appears: