HP Compaq StorageWorks TL881 DLT Mini-Library - Manual (Page 147)

6-12 Compaq TL881 Minilibrary System Users Guide
Table 6-2
Fault Symptom Codes
continued
Motor Process Error Codes – 3xxx
FSC Message Description
3001 Picker Retries Exceeded Remove from code.
3002 Picker Tach Errors TACH errors were detected during a
picker movement.
3003 Elevator Tach Errors TACH errors were detected during an
elevator movement.
3004 Elevator Init Error An elevator jam was detected during
initialization.
3006 Passthru Tach Errors TACH errors were detected during
pass-thru elevator movement.
3007 DLT Timeout Error Communication with one of the DLT
drives was unsuccessful.. A command
was issued but status was not
returned.
3008 Invalid Drive State Currently unused.
3009 Door Tach Errors TACH errors were detected during a
door movement.
300A Door Fault During initialization, the door was
found to be in an improper state.
300B Elev Open Tach Open Tach detected on elevator motor.
300C Picker Open Tach Open Tach detected on picker motor.
300D Door Open Tach Open Tach detected on door motor.
300E Drive Stow Error A problem was encountered while
trying to stow a cartridge to a drive.
Couldn’t close the door.
3010 Picker Retries Exceeded While attempting to fetch a cartridge,
the picker was not able position
properly within 16 attempts.
continued