HP Compaq StorageWorks TL881 DLT Mini-Library - Manual (Page 102)

Installation 3-33
4. Press the button repeatedly to select Set Special Configuration, as
shown in Figure 3-21:
SHR-1333
Figure 3-21. Configure Submenu, Scrolled
5. Press the Enter button. The screen shown in Figure 3-22 appears:
SHR-1334
Figure 3-22. Special Config Submenu
6. ress the button repeatedly to scroll down to select Alternate Config,
as shown in Figure 3-23:
SHR-1335
Figure 3-23. Special Config Submenu, Scrolled
7. Press the Enter and then button to change the line to ‘Slave’. Press
Enter again and after selection stops flashing. The screen shown in
Figure 3-24 appears:
SHR-1336
Figure 3-24. Acknowledgment Screen