HP Compaq StorageWorks TL881 DLT Mini-Library - Manual (Page 52)

2-26 Compaq TL881 Minilibrary System Users Guide
SHR-1453
From:
*Slot4
To:
*DLT0
Figure 2-32. Load/Unload ‘To’ Entry Screen
You can now simply press the Enter button to select DLT0 as the destination.
Note that there is no at the end of line 4, nor at the end of line 1. There
are no additional choices because 1) you have selected a slot as the source, so
the destination must be a drive, and 2) DLT1 already has a cartridge in it, so it
cannot be a valid destination. Press the
Enter button to select DLT0. In
response, the Confirmation Screen shown in Figure 2–32 appears:
SHR-1454
Figure 2-33. Confirmation Screen
As the confirmation screen indicates, to execute the load or unload, press the
Enter button. If the confirmation screen does not show your intended source
and destination, press the Escape button to return to the ‘From’ entry screen.
When you press the Enter button, the screen shown in Figure 2–33 appears. If
the source is a drive, the word ‘Unload’ appears in place of the word ‘Load’ on
line 4.
SHR-1455
Figure 2-34. Load/Unload ‘In Progress’ Screen
When the load or unload operation is finished, the Default Screen reappears.