HP Compaq StorageWorks TL881 DLT Mini-Library - Manual (Page 148)

Diagnostics and Troubleshooting 6-13
Table 6-2
Fault Symptom Codes
continued
Motor Process Error Codes
FSC Message Description
3011 Picker Retries Exceeded While attempting to fetch a cartridge,
the picker was not able position
properly within 16 attempts.
3012 Picker Retries Exceeded While attempting to fetch a cartridge,
the picker was not able position
properly within 16 attempts.
3013 Picker Retries Exceeded While attempting to fetch a cartridge,
the picker was not able position
properly within 16 attempts.
3014 Picker Retries Exceeded While stowing to a drive, the initial
push failed.
3020 Undefined Config An unsupported configuration was
detected.
3021 Wrong Codebase An attempt was made to flash the
incorrect firmware image into the unit.
Press Enter to Flash or ESC to cancel.
3040 Motor Firmware Error An undefined picker position was
specified.
3042 Motor Firmware Error An undefined door position was
specified.
3100 Picker Jammed The picker stalled during an inventory.
3101 Picker Jammed During a stow operation, the picker
was not able to insert the cartridge
into the bin.
continued