HP Compaq StorageWorks TL881 DLT Mini-Library - Manual (Page 154)

Diagnostics and Troubleshooting 6-19
Table 6-2
Fault Symptom Codes
continued
Menu Error Codes – 5xxx
FSC Message Description
5090 Slave Command Failure Error occurred sending a menu mode
command to a slave module.
Module Error Codes – 6xxx
FSC Message Description
6001 Comm Open Error An attempt to open the RS-232 serial
communication port used by the inter-
module processes failed.
6002 Comm Port Send Error An inter-module process (Master or
Slave) was sending a packet to a
remote module, but the UART detected
an error condition during the transfer.
6003 Comm Port Recv Error An inter-module process (Master or
Slave) was receiving a packet from a
remote module, but the UART detected
an error condition during the transfer.
6004 EnQ Without IDs
6005 DeQ Without Ids
6006 EnQ Null Pointer
6007 No Free Comm Blks
6010 Pkt Send Error The Master inter-module process has
repeatedly attempted to send a packet
to a Slave inter-module process, but
all retries have been exhausted before
the packet could be successfully sent.
6011 Pkt Receive Error The Master inter-module process has
repeatedly attempted to receive a
packet from a Slave inter-module
process, but all retries have been
exhausted before the packet could be
successfully received.
continued