HP Compaq StorageWorks TL881 DLT Mini-Library User Manual
Page 134

5-4 Compaq TL881 Minilibrary System Users Guide
4.
Lines 2 and 4 are scrollable. The choices available on Line 2 are DLT0,
DLT1 and Both. Let us assume you want to clean DLT0. Press the
Enter button once to accept DLT0. The
moves to line 4 of the
display. Press the Enter button again to use the cartridge in Slot 0. (If
you cannot to use slot 0 for the cleaning cartridge, scroll to line 4 to
select another slot.)
5.
The screen shown in Figure 5-4 appears:
SHR-1464
Figure 5-4. Cleaning Confirmation Screen
6.
As the confirmation screen indicates, to execute the cleaning operation,
press the Enter button. If the confirmation screen does not show your
intended drive and cleaning cartridge, press the Escape button to return
to the Cleaning Submenu.
When you press the Enter button, The screen shown in Figure 5-5 appears:
SHR-1462
Figure 5-5. Cleaning In Progress Screen
When the cleaning operation is completed, the Default Screen reappears.
Removing the Cleaning Cartridge
NOTE: If the Base Module is installed in a sufficiently secure area, you may elect not to
use the Magazine Security Lock. In that event, leave the lock in the unlocked position.
1.
Examine the Default Screen on the Control Panel to determine whether
any cartridges are loaded into the drives. If so, then unload each using
the Load/Unload Menu, as described in Chapter 2, Operation.