HP Compaq StorageWorks TL881 DLT Mini-Library User Manual

Page 105

3-36 Compaq TL881 Minilibrary System Users Guide

SHR-1457

Figure 3-29. Set SCSI Submenu Scrolled

With the

next to line 1, press the

Enter

button. The

moves to line

2 and the

remains at the end of line 4, and a

appears at the end of

line 1. Now you can use the

and

buttons to scroll through the

possible settings. Scroll downward so that 3 is displayed, then press the

Enter

button to save the new selection. An * appears to the left of the 4,

to indicate that it is the current selection.

Press the

Escape

button repeatedly until the submenu in Figure 3-27

reappears.

Repeat this procedure for each configuration option you want to change.

Setting up a Mail Slot

Some of the available host software enables the system administrator to limit
access to the library as a whole while permitting insertion into or removal
from the library of one or more tape cartridges when needed. This feature is
commonly called a mail slot. It is implemented using SCSI Import/Export
elements.

In the MiniLibrary system, you can designate the magazine of any
MiniLibrary Base Module as the mail slot magazine. When you do so, the
entire magazine is withdrawn from the list of storage elements. You can
designate any number of mail slots from one slot up to the full size of the
magazine. To configure a mail slot, use the following procedure.

As shown in Figures 3-25 through 3-27 in the preceding procedure,
navigate from the Default Screen through the Main Menu to the
Configure Submenu.

Scroll down on the Configure Submenu until you see ‘Set Mail Slot’,
and select that option. The screen shown in Figure 3-30 appears:

SHR-1340