HP Compaq StorageWorks TL881 DLT Mini-Library - Manual (Page 60)

2-34 Compaq TL881 Minilibrary System Users Guide
1
2
3
SHR-1232
Figure 2-48. DLT Tape Cartridge
1 Leader
2 Write protect OFF
3 Write protect ON
Write Protection
The write protection switch of a DLT tape cartridge is also shown in Figure
2–46. To enable data recording, slide the write protect switch to the right so
that no orange color is visible through the window in the write protect switch
(2). To write protect the DLT tape cartridge, slide the write protect switch to
the left until the orange indicator shows through the window on the write
protect switch (3).
Barcode Labels
Barcode labels are included with the TL881 MiniLibrary and Expansion Unit.
Additional labels can be ordered (refer to Appendix B). The label slips into the
slot adjacent to the write-protect switch on each tape cartridge. The code used
may be Code 39, Codebar, 2-of-9, standard 2-of-5, or interleaved 2-of-5, with
a length of 8 digits. Minimum element width is 7.5 mm.
TL881 Components
There are four basic components in the TL881 MiniLibrary system: