Setting up the raid manager command device – HP XP RAID Manager Software User Manual
Page 26
6.
In the Confirm window, do the following and then click Apply:
•
For Task Name type a name for the task.
NOTE:
For character and symbol limits and default values, see
•
For Go to tasks window for status, select to open the Tasks window.
More information
•
For more information about the tasks you can perform using the Create LDEVs wizard and
window, see the HP XP P9000 Provisioning for Open Systems User Guide.
•
For more information about creating LDEVs and about the tasks you can perform from this
window, see the HP XP P9000 Provisioning for Open Systems User Guide.
Setting up the RAID Manager command device
You must set up a volume on the storage system for the RAID Manager and dedicate it as the RAID
Manager command device. This device acts as the interface between the RAID Manager and the
storage system.
For more information about how to set up the command device, see the HP XP P9000 RAID Manager
Reference Guide.
26
Business Copy/Snapshot installation and configuration