HP XP RAID Manager Software - Manual (Page 73)

Summary table
Description Item
Shows the following information about the pool status: Status
Values:
•
Normal: The pool is in a normal status and is accessible.
•
Warning: The pool-VOL is blocked.
•
Exceeded Threshold: The pool’s used capacity exceeds the pool threshold.
•
Shrinking: Reducing the pool-VOL.
•
Blocked: The pool is full, or an error occurred in the pool, therefore the
pool is blocked and cannot be used. If the pool is in both Warning and
Blocked status, only Blocked is shown.
The pool’s name and identifier. Pool Name (ID)
The pool’s LDEV ID and LDEV name. Pool VOL with System Area (Name)
For SS, a hyphen (-) is shown.
The pool’s type. Pool Type
Value: Snapshot
The pool’s RAID level. RAID Level
For multiple RAID levels in a pool, Mixed is shown.
The pool’s data drive type and RPM. Drive Type/RPM
For multiple Drive Type/RPMs in a pool, Mixed is shown.
(External LDEVs) External Storage and the value of the external LDEV tier rank
is shown.
The CLPR configured in SS pool-VOL in ID:CLPR name form. CLPR
For pool-VOLs other than for SS, a hyphen (-) is shown.
Shows whether cache mode is enabled or disabled. Cache Mode
For non-external volume configurations, a hyphen (-) is shown.
Selected pool volume window 73