HP XP RAID Manager Software - Manual (Page 88)

Description Item
Default: When you select one pool, for Prefix, the pool name is shown.
When multiple pools are selected, the numbers ranging from the specified Initial
Number to the maximum number of the same digits are automatically set to the
pool name.
Examples:
• If you set the Initial Number at 1, a number from 1 to 9 is automatically added
to each pool name.
•
If you set the Initial Number at 08, a number from 08 to 99 is added to each
pool name.
• If you set the Initial Number to 098, a number from 098 to 999 is added to
each pool name.
Information about the pool’s warning threshold. Warning Threshold
Select and type the threshold value.
Minimum threshold: Pool usage rate plus one percent (1%)
Maximum threshold: 95 percent (95%)
For SS, this item is unavailable. Depletion Threshold
Confirm window
The Confirm window is the second window in the Edit Pools wizard. This window shows the Selected
Pools table.
Use this window to do the following:
1. Type a name for the task.
2. Confirm the settings in the list.
3. Add the task to the Tasks queue so that the operation is performed.
The following image shows the Selected Pools table.
88 Snapshot GUI reference