HP XP RAID Manager Software - Manual (Page 113)

Pair status definitions
For more information about pair status descriptions, see “Pair status definitions” (page 44) . Click
File/Refresh to ensure the pair status data is current.
The status names are slightly different in the new RWC GUI than in the previous GUI version
showing in the secondary window. The following table shows the new and previous status names.
Previous RWC pair status names Current RWC pair status names
SMPL SMPL (is not shown)
COPY, COPY(RS)/COPY COPY
PAIR PAIR
PSUS PSUS
PSUS PFUS
PAIR PFUL
COPY(RS-R)/RCPY RCPY
PSUE PSUE
Statuses required for pair operations
To perform a pair operation, the pair must have a specific status. The following table shows the
RAID Manager pair operations and the required statuses to complete the pair operation.
Required status RAID Manager pair operation
SMPL paircreate
PAIR/PFUL paircreate –split
PAIR/PFUL pairsplit
PSUS/PFUS, PSUE pairresync
PSUS/PFUS pairresync -restore
PAIR/PFUL, PSUS/PFUS, PSUE pairsplit -S
Monitoring pair volume details
You can review more details for a pair and pair-volumes than are available on the Pair Operation
window. This includes volume capacity, related pool ID, pool usage, and so on.
Procedure 2 To check pair and volume details
1. In RWC, click Actions > Local Replications > BC/SS > Pair Operation.
2. In the Pair Operation window, select the desired SS pair on the Volume list, right-click and
select Detail.
Monitoring the system in the secondary window 113