HP XP RAID Manager Software - Manual (Page 58)

Cause of error RAID Manager command SSB2
• You specified an MU number (SS ID) that is already in use.
•
You specified a pool that is unusable.
• You have exceeded the license capacity.
•
The control tables for SS are running out.
The command ends abnormally because SS or BC/SS is not installed. paircreate, pairsplit,
pairresync, pairresync
-restore 9721
The command ends abnormally because additional shared memory (FC Z, TPF,
Extension1) does not exist. All commands 9723
The command ends abnormally because additional shared memory (more than
COW1) does not exist. All commands 9724
The command ends abnormally because the LDEV number of the volume you
specified as the P-VOL exceeds the range. All commands 9725
The command ends abnormally because you specified the unmounted volume
as the SS P-VOL. All commands 9726
The command ends abnormally because you specified a blocked volume as the
SS P-VOL. paircreate, pairsplit,
pairresync, pairresync
-restore 9727
The command ends abnormally because you specified a volume that is in the
process of being formatted as the SS P-VOL. paircreate, pairsplit,
pairresync, pairresync
-restore 9728
The command ends abnormally because you specified a volume as the SS P-VOL
and that volume has an emulation type other than OPEN-V. paircreate, pairsplit,
pairresync, pairresync
-restore 9729
You cannot create the pair because the volume you specified as the SS P-VOL
has the command device setting. paircreate 972a
You cannot create the pair because the capacity of the volume you specified as
the SS P-VOL exceeds the supported size (4TB). paircreate 972c
You cannot create the pair because the capacity of the volume you specified as
the SS S-VOL exceeds the supported size (4TB). paircreate 972e
You cannot create the pair because you specified a V-VOL as the SS P-VOL. paircreate 972f
You cannot create the pair because you specified a pool-VOL as the SS P-VOL. paircreate 9730
You cannot create the pair because the SS P-VOL and Cnt Ac-S P-VOL share the
volume, and the status of the Cnt Ac-S pair is not “PSUS” or “PSUE”. pairresync -restore 9731
You cannot restore the pair because the SS P-VOL and Cnt Ac-J P-VOL share the
volume, and the status of the Cnt Ac-J pair is not “PSUS” or “PSUE”. pairresync -restore 9732
You cannot restore the pair because the SS P-VOL and Cnt Ac-S S-VOL share
the volume. pairresync -restore 9733
You cannot restore the pair because the SS P-VOL and Cnt Ac-J S-VOL share the
volume. pairresync -restore 9734
You cannot create the pair because you specified Cnt Ac-J’s journal volume as
the SS P-VOL. paircreate 9735
The command ends abnormally because the LUSE volumes you specified for the
P-VOL and S-VOL do not have the same structure. paircreate, pairsplit,
pairresync, pairresync
-restore 9736
You cannot create the pair because you specified a volume with the VMA setting
as the SS P-VOL. paircreate 973a
58 Business Copy/Snapshot troubleshooting