HP XP RAID Manager Software User Manual
Page 74

Description
Item
The number of pool-VOLs set for the pool, and the maximum number of
pool-VOLs that you can set.
Number of Pool VOLs
The number of V-VOLs associated with the pool.
Number of V-VOLs
For SS, a hyphen (-) is shown.
The number of SS P-VOLs.
Number of Primary VOLs
For pools other than for SS, a hyphen (-) is shown.
The used and total pool capacity. If the pool consists of multiple pool-VOLs, the
sum of their capacities is shown for Total.
Pool Capacity (Used/Total)
The used and total V-VOL capacity.
V-VOL Capacity (Used/Total)
For SS, a hyphen (-) is shown.
The subscription rate.
Subscription (Current/Limit)
For SS, a hyphen (-) is shown.
Information about the pool threshold.
User-Defined Threshold
(Warning/Depletion)
Values: Warning and Depletion
For SS, a hyphen (-) indicates a depletion.
Shows whether Smart is enabled or disabled.
Tier Management
For SS, a hyphen (-) is shown.
The cycle of performance monitoring and tier relocation.
Cycle Time
If Smart is disabled, a hyphen (-) is shown.
The starting and ending of performance monitoring times.
Monitoring Period
If Smart is disabled, a hyphen (-) is shown.
The monitoring mode set for the pool, Continuous Mode or Period Mode
Monitoring Mode
If Smart or Smart Z is disabled, a hyphen (-) is shown.
Pool monitoring status. If the monitoring is being performed, In Progress is
shown; otherwise a hyphen (-) is shown.
Monitoring Status
The latest monitoring data is shown, as follows:
Recent Monitor Data
•
If the monitoring data exists, the monitoring period of time is shown.
Example: 2010/11/15 00:00 - 2010/11/15 23:59
•
If the monitoring data is being obtained, only the starting time is shown.
Example: 2010/11/15 00:00 -
•
If the latest monitoring data does not exist, a hyphen (-) is shown.
The pool management task being performed on the pool.
Pool Management Task
For SS, a hyphen (-) is shown.
The status of the tier relocation processing.
Relocation Result
For pools other than for Smart or Smart Z, a hyphen (-) is shown.
74
Snapshot GUI reference