HP OpenView Storage Management Appliance and Software - Manual (Page 49)

Configuring the Storage Management Appliance Software
33 Storage Management Appliance Software V2.0 User Guide
3. Enter the domain name (if needed), user name, and password, and then click
OK to activate the changes.
4. Click New ( Figure 24 ) to display the Create a new application password
page where you can add a user name and password for any known application.
Figure 26: Create a new application password page
Use the Host and Application drop-down lists to choose any known
application.
Note: You must use the Create a new application password page to enter a password
for the HSV Element Manager before HSV storage elements can be discovered by the
Management Appliance.
Click Delete ( Figure 24 ) to remove access profile information previously entered
for an application.
Each access profile includes a host name or TCP/IP address of a remote system,
the name of an application on that system, a password (not displayed), and, for
some applications, a domain name and user name.