Logging on – HP OpenView Storage Management Appliance and Software User Manual
Page 26

Understanding the Storage Management Appliance Software
10
Storage Management Appliance Software V2.0 User Guide
Logging On
You can log on to the Storage Management Appliance from any computer on your
network using IP addressing.
1. Open a supported web browser.
See the HP OpenView Storage Management Appliance Software V2.0
QuickSpecs for supported browsers and operating systems. The QuickSpecs
are available at the following website.
2. Enter the Management Appliance IP address or name in the browser’s
location bar and press Enter.
You are prompted for your logon information.
3. Enter your user name and password and click OK to display the Management
Appliance Home page. You should receive your user name and password
from the system administrator or user assigned the Administrator privilege
level.
After installing the V2.0 update you can log on with the system administrator user
name and password used with the prior Storage Management Appliance version.
Unless changed during operation of the prior version, the administrator logon
information should consist of the following defaults.
User name: administrator
Password: adminxxxxxx
where
number in reverse order. For example, with a serial number of
D050FK31K015 the default password would be admin510K13. Note that the
password is case sensitive and any letters in the serial number must be entered
as upper case. The serial number is located on the front panel of the
Management Appliance.
Note:
To maintain system security you should change the administrator password as
soon as possible. Be sure the latest password can be retrieved by authorized
personnel.