HP XP External Storage Software - Manual (Page 80)

Figure 40 Port Discovery Dialog Box
The Port Discovery dialog box displays the list of the external ports in the local storage system.
When you click the external port in the list, WWNs of the external storage system connected
to the clicked external port are searched for, and that the Available Paths in the Configure
Cross-subsystem Paths dialog box is updated.
• Selected Paths (Lower part of the dialog box)
The cross-subsystem paths that you have added in the Available Paths are displayed.
• Priority: Priority of the cross-subsystem paths connecting to the external volume. 1 indicates
the path with the highest priority.
• Port: Port of the local storage system that the port attribute is set to External.
• WWN: WWN of the external storage system that the port attribute is set to Target.
• OK button
Saves the settings and closes the dialog box.
• Cancel button
Cancels the settings and closes the dialog box.
• Pop-up Menu
Right-click a row in the Configure Cross-subsystem Paths dialog box to perform the following
operations from the pop-up menu.
Table 16 Pop-up Menu in the Configure Cross-subsystem Paths dialog box
Right-clicked Area Pop-up menu Reference Description
WWN in the
Available Paths
Add
Section Configuring
Cross-subsystem Path
on page81.
Allows you to add
cross-subsystem paths.
Selected Paths Delete
Section Canceling
the Cross-subsystem
Path Configuration on
page 83.
Allows you to delete the selected
cross-subsystem path.
Raise Priority
Section Changing
the Configured
Cross-subsystem Path
Priority on page 82.
Allows you to raise the priority
of the selected cross-subsystem
path.
Lower Priority
Allows you to lower the priority
of the selected cross-subsystem
path.
80 Performing External Storage Operations