HP XP External Storage Software - Manual (Page 62)

Table 11 Status of the Cross-subsystem Path displayed in the Status
Displayed Item Description
Normal The cross-subsystem path is normal.
-
The status of the cross-subsystem path is not retrieved yet. Click Status in the
Path Operation window to display the status of the cross-subsystem path.
Unknown The status of the cross-subsystem path is unknown.
Blockade The cross-subsystem path is blocked.
Disconnect
Connecting to the external storage system or the external volume is
intentionally stopped using the Disconnect Subsystem command or the
Disconnect Volume command.
Warning
There are cross-subsystem paths whose status is not normal. Check the status
of the cross-subsystem paths.
Checking The processing of checking the cross-subsystem path status is in progress.
• Pop-up menu
Right-click a row in the Path Operation list to perform the following operations from the pop-up
menu.
Table 12 Pop-up Menu in the Path Operation List (when Subsystem is clicked)
Pop-up menu Reference Description
Disconnect Paths
Section Stopping
the Use of Paths to
the External Volume
(Disconnect Paths) on
page 92.
Allows you to stop the use of the cross-subsystem paths
which are connected to the selected external port of
the local storage system.
Check Paths
Section Restoring the
Paths to the External
Volume (Check Paths)
on page 93.
Allows you to resume using the cross-subsystem paths
which are connected to the selected external port of
the local storage system.
Path Operation List (When Product Name is Clicked)
When you click a product name in the Path Operation tree, WWN which indicate the port in the external
storage system is displayed in the list.
Figure 28 Path Operation List when Product Name is Clicked
The Path Operation list consists of:
• WWN
The following items are displayed:
• WWN: WWN indicating the port in the external storage system that the connection setting is
completed.
• QDepth: The number of Read/Write commands which can be issued (queued) to the external
volume at a time.
• I/O TOV: Value specified as the time over of the I/O to the external volume.
62 Using the External Storage GUI