HP XP External Storage Software Instruction Manuals and User Guides
We have 8 Instruction Manuals and User Guides for XP External Storage Software HP
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 200 |
| Size: | 2.48 MB |
Show table of contents
Document Outline
- External Storage XP user guide for the XP12000, XP10000, SVS200
- Table of Contents
- About this guide
- 1 Overview of connecting external arrays
- 2 Preparing for External Storage XP operations
- System requirements
- External Storage XP requirements
- Installing External Storage XP
- Preparing for External Storage XP settings
- Powering arrays on or off
- Using mapped external LUs from the host connected to the local array
- Uninstalling External Storage XP
- Limitations on External Storage XP operations
- Combining External Storage XP with other HP StorageWorks products
- 3 Managing cache with external storage
- 4 External Storage XP panes
- 5 Configuring external LUs
- Overview of configuring external LUs
- Setting an external array's port
- Setting a local array's port attributes
- Discovering and Mapping LUs
- Setting alternate paths for external LUs
- Adding alternate paths by selecting multiple external LUs (Add Paths)
- Deleting alternate paths by selecting multiple external LUs (Delete Paths)
- Checking an external LU's status (LDEV Information)
- Disconnecting external arrays or LUs
- Checking the connection status and resuming external LU operations (Check Paths & Restore Vol.)
- Restoring external LUs (LDEV Restore)
- Changing the cache mode setting of the external LU
- Changing the cache mode of all external LUs in an external array
- Changing the cache mode of an individual external LU
- Stopping the use of paths to an external LU by specifying an external array's WWN (Disconnect Paths)
- Restoring paths to an external LU by specifying an external array's WWN (Check Paths)
- Changing an external array's port setting
- Stopping the use of paths to an external LU by specifying a local array's port (Disconnect Paths)
- Restoring paths to an external LU by specifying a local array's port (Check Paths)
- Deleting external LU mappings (Delete LU)
- 6 Troubleshooting NAS Blade systems that include external arrays
- 7 Remote command devices
- 8 Troubleshooting External Storage XP
- A Notes on connecting external arrays
- Connecting Thunder 9500V subsystems
- System parameters for connecting Thunder 9500V subsystems
- Relation btw. ser. nums. in the Dev. list on LU Op. pane & Thunder 9500V subsys. mod.
- Relationship between the WWN of the port on the Thunder 9500V subsystem and the controller
- Path status and examples of recovery procedures (Thunder 9500V subsystems)
- Connecting TagmaStore AMS and TagmaStore WMS subsystems
- System parameters for connecting TagmaStore AMS and TagmaStore WMS subsystems
- Rel. btw. ser. numbs. in Dev. list on the LU Op. pane & T-Stor. AMS & T-Stor. WMS subsys. mods.
- Relation btw. the WWN of the port on the TagmaStore AMS or TagmaStore WMS subsys. and contr.
- Path status and examples of rec. proce. (TagmaStore AMS and TagmaStore WMS subsys.)
- Connecting XP12000/XP10000 Disk Arrays
- Connecting XP1024/XP128 Disk Arrays
- Connecting XP512/XP48 Disk Arrays
- Connecting HP 200 Storage Virtualization System as external storage
- Connecting EVA arrays
- Connecting Thunder 9500V subsystems
- B Required volume capacity for emulation types
- C Adjusting volume capacity for copy pair setting
- D Configuring MSA1000/1500 as external arrays
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 176 |
| Size: | 5.07 MB |
Show table of contents
Document Outline
- About this guide
- 1 Overview of connection external arrays
- 2 Preparing for External Storage XP operations
- 3 Managing cache with external storage
- 4 External Storage XP panes
- 5 Configuring external LUs
- 6 Troubleshooting NAS Blade systems that include external arrays
- 7 Remote command devices
- 8 Troubleshooting External Storage XP
- A Notes on connecting external arrays
- B Required colume capacity for emulation types
- c Adjusting volume capacity for copy pair setting
- D Configuring MSA 1000/1500 as external arrays
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 110 |
| Size: | 3.13 MB |
Show table of contents
Document Outline
| Recognized languages: | English |
|---|---|
| Pages: | 138 |
| Size: | 4.92 MB |
Show table of contents
Document Outline
- HP StorageWorks XP24000 External Storage Software User’s Guide
- About this Guide
- 1 Overview of HP StorageWorks XP External Storage Software
- 2 About External Storage Operations
- 3 Preparing for External Storage Operations
- 4 Using the External Storage GUI
- 5 Performing External Storage Operations
- Overview of Setting Operations
- Setting Port of External Storage System
- Setting Port Attribute for Local Storage System
- Mapping an External Volume Automatically
- Mapping an External Volume Manually
- Setting the Cross-subsystem Paths
- Checking the External Volume Details
- Turning On or Off the Storage System
- Disconnecting External Storage System or Disconneccting External Volume
- Checking Connection Status and Resuming External Volume Operation
- Stopping the Use of Paths to the External Volume (Disconnect Paths)
- Restoring the Paths to the External Volume (Check Paths)
- Changing the Cache Mode Setting of the External Volume
- Changing the Inflow Control Setting of the External Volume
- Changing the Port Setting of the External Storage System
- Editing Mapping Policy
- Deleting the External Volume Mapping
- 6 Remote Command Devices
- 7 Troubleshooting
- A Connecting External Storage Systems
- TagmaStore AMS Storage System, TagmaStore WMS Storage System
- Thunder 9500V Storage System
- USP V Storage System
- TagmaStore USP Storage System, TagmaStore NSC Storage System
- Lightning 9900V Storage System
- Lightning 9900 Storage System
- SVS200 Storage System
- EVA Storage System
- System Parameter Settings for Connecting Sun StorEdge 6120/6320
- System Parameter Settings for Connecting StorageTek FlexLine 380
- System Parameter Settings for Connecting CLARiiON CX600
- Non-HP Storage Systems
- B Required Volume Capacity for Each Emulation Type
- C Adjusting Volume Capacities for Pairs
- D Acronyms and Abbreviations
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 170 |
| Size: | 2.48 MB |
Show table of contents
Document Outline
- XP24000/XP20000 External Storage Software User Guide
- Contents
- 1 Overview of HP StorageWorks XP External Storage Software
- 2 About XP External Storage Operations
- Connecting External Storage Systems
- XP External Storage Components
- XP External Storage Operations
- Configuring XP External Storage
- Choosing Mapping Policy
- Using a Mapped External Volume from a Connected Host
- Interoperability with other Products and Functions
- LUN Manager and Configuration File Loader
- LUN Expansion (LUSE)
- Virtual LVI/LUN (VLL)
- Cache Residency Manager
- Performance Monitor and XP Auto LUN
- XP Continuous Access and Hitachi TrueCopy™ for Mainframe
- HP StorageWorks XP Continuous Access Journal Software and Hitachi Universal Replicator™ for Mainframe
- HP StorageWorks XP Business Copy Software and Hitachi ShadowImage™ for Mainframe
- HP StorageWorks XP Snapshot Software
- HP StorageWorks XP Thin Provisioning Software
- SNMP Agent
- Examples of Using External Volumes with Other Products
- 3 Preparing for XP External Storage Operations
- System Requirements
- Guidelines for XP External Storage Operations
- Mapping Guidelines
- Recommended Applications According to HDD Type
- Capacity Guidelines
- Guidelines for Mainframe Volumes
- Volume Attribute Guidelines
- Creating LUSE Volume Guidelines
- Maintenance Guidelines for an External Storage System
- Performance and Status Guidelines
- RAID Level Considerations
- AMS 2000 Series Guidelines
- Installing and Uninstalling XP External Storage
- Starting XP External Storage
- 4 Using the XP External Storage GUI
- 5 Performing XP External Storage Operations
- Overview of Setting Operations
- Setting Port of External Storage System
- Setting Port Attribute for Local Storage System
- Mapping an External Volume Automatically
- Mapping an External Volume Manually
- Setting the Cross-subsystem Paths
- Checking the External Volume Details
- Turning On or Off the Storage System
- Disconnecting External Storage System or Disconnecting External Volume
- Checking Connection Status and Resuming External Volume Operation
- Stopping the Use of Paths to the External Volume (Disconnect Paths)
- Restoring the Paths to the External Volume (Check Paths)
- Changing the Cache Mode Setting of the External Volume
- Changing the Inflow Control Setting of the External Volume
- Changing the Port Setting of the External Storage System
- Performing Maintenance for External Subsystem
- Editing Mapping Policy
- Deleting the External Volume Mapping (Delete Volume Command)
- 6 Using Spreadsheets for XP External Storage Operations
- Introduction
- Before Using Spreadsheets
- Available Types and Operation Tags
- Saving Storage System Information
- Mapping External Volumes
- Disconnecting an Individual External Volume (DisconnectVolume Tag)
- Resuming an Individual External Volume (CheckPath-RestoreVolume Tag)
- Deleting the External Volume Mapping (DeleteVolume Tag)
- Changing Path Group
- Example of a Spreadsheet
- 7 Remote Command Devices
- 8 Troubleshooting
- 9 Support and Other Resources
- A Connecting External Storage Systems
- AMS/WMS Storage System
- System Parameters
- Relationship between the Serial Number and the AMS/WMS Model
- Relationship between the WWN of the Port and Controller (AMS/WMS)
- Path Status and Examples of the Recovery Procedure (AMS/WMS)
- P9500 Disk Array
- Path status and examples of recovery procedure
- Notes on Using the Power Savings Option (AMS/WMS)
- Thunder 9500V Storage System
- USP V/VM Storage System
- TagmaStore USP/NSC Storage System
- Lightning 9900V Storage System
- Lightning 9900 Storage System
- SVS200 Storage System
- HP StorageWorks EVA Storage System
- Sun StorEdge 6120/6320
- Sun StorageTek FlexLine 380
- Sun StorageTek 2540
- Sun StorageTek V2X2
- EMC CLARiiON CX Series
- EMC Symmetrix Series
- IBM DS3000/DS4000/DS5000 Series
- System Parameter for Connecting IBM SVC Series
- Notes on Connecting IBM XIV Series
- Fujitsu FibreCAT CX Series
- Non-HP Storage Systems
- AMS/WMS Storage System
- B Required Volume Capacity for Each Emulation Type
- C Adjusting the Volume Capacities for Pairs
- D The ExPath Tool
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 106 |
| Size: | 1.95 MB |
Show table of contents
Document Outline
- Contents
- About this guide
- 1 External Storage XP for the XP10000/XP12000
- Mapping
- Alternate paths
- Figure 2 Example of alternate path settings
- Figure 3 Example of alternate path configuration using two switches
- Figure 4 Example of incorrect alternate path configurations
- Examples of switching I/O execution paths to alternate paths
- External Storage XP uses
- Combining External Storage XP with other HP StorageWorks products
- Requirements and restrictions
- System requirements
- Storage devices that can be connected as external disk arrays
- Fibre Channel switches supported
- External Storage XP requirements
- Limitations concerning External Storage XP operations
- Preparing for External Storage XP operations
- External Storage XP operations
- Configuring external LUs
- Overview of steps required to define external LUs
- Configuring external disk array LUs, host mode, and ports
- Setting port attributes on the local disk arrays
- Mapping external LUs
- Setting alternate paths on each external LU
- Checking External Storage XP volume status (LDEV Information)
- Disconnecting external disk arrays or external LUs
- Checking connection status and resuming external LU operations (Check Paths & Restore Vol.)
- Deleting external LU mappings (Delete LU)
- ”Alternate paths” on page 12Remote command devices
- Troubleshooting External Storage XP
- System parameter for external disk arrays
- Required volume capacity for emulation types
- Description for Characteristic2
- Adjusting volume capacity for copy pair setting
- Additional information about TagmaStore AMS, TagmaStore WMS, and Thunder 9500V Series subsystems
- A Using XP12000 disk arrays with EVA GL disk arrays attached as subordinated external storage disk arrays
- Preface
- Configuration
- Configuring MSA1000/1500 as external disk arrays
- Recommendations
- Troubleshooting
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 164 |
| Size: | 3.35 MB |
Show table of contents
Document Outline
- HP StorageWorks External Storage XP user guide
- Contents
- About this guide
- 1 Overview of connecting external arrays
- 2 Preparing for External Storage XP operations
- System requirements
- External Storage XP requirements
- Installing External Storage XP
- Preparing for External Storage XP settings
- Powering arrays on or off
- Using mapped external LUs from the host connected to the local array
- Uninstalling External Storage XP
- Limitations on External Storage XP operations
- Figure 11 Example of external LU with 2 TB or less
- Figure 12 External LU capacity is larger than the specified emulation type’s basic capacity (OPEN-3 example)
- Figure 13 External LU capacity is smaller than the specified emulation type’s basic capacity
- Table 4 When external LU’s emulation type is OPEN
- Table 5 When external LU’s emulation type is for mainframes
- Combining External Storage XP with other HP StorageWorks products
- 3 Managing cache with external storage
- Guidelines for using cache with external storage
- Determining, setting, or changing the external LU cache mode
- Partitioning cache for external storage
- Determining the number and size of needed partitions
- Creating Cache partitions
- Changing storage system modes
- 4 External Storage XP panes
- 5 Configuring external LUs
- Overview of configuring external LUs
- Setting an external array’s port
- Setting a local array’s port attributes
- Mapping external LUs (Add LU)
- Setting alternate paths for external LUs
- Adding alternate paths by selecting multiple external LUs (Add Paths)
- Deleting alternate paths by selecting multiple external LUs (Delete Paths)
- Checking an external LU’s status (LDEV Information)
- Disconnecting external arrays or LUs
- Checking the connection status and resuming external LU operations (Check Paths & Restore Vol.)
- Restoring external LUs (LDEV Restore)
- Stopping the use of paths to an external LU by specifying an external array’s WWN (Disconnect Paths)
- Restoring paths to an external LU by specifying an external array’s WWN (Check Paths)
- Changing an external array’s port setting
- Stopping the use of paths to an external LU by specifying a local array’s port (Disconnect Paths)
- Restoring paths to an external LU by specifying a local array’s port (Check Paths)
- Deleting external LU mappings (Delete LU)
- 6 Troubleshooting NAS Blade systems that include external arrays
- 7 Remote command devices
- 8 Troubleshooting External Storage XP
- A Notes on connecting external arrays
- Connecting Thunder 9500V subsystems
- System parameters for connecting Thunder 9500V subsystems
- Relationship between serial numbers in the Device list on the LU Operation pane and Thunder 9500V subsystem models
- Relationship between the WWN of the port on the Thunder 9500V subsystem and the controller
- Path status and examples of recovery procedures (Thunder 9500V subsystems)
- Connecting TagmaStore AMS and TagmaStore WMS subsystems
- System parameters for connecting TagmaStore AMS and TagmaStore WMS subsystems
- Relationship between serial numbers in the Device list on the LU Operation pane and TagmaStore AMS and TagmaStore WMS subsystem models
- Relationship between the WWN of the port on the TagmaStore AMS or TagmaStore WMS subsystem and the controller
- Path status and examples of recovery procedures (TagmaStore AMS and TagmaStore WMS subsystems)
- Connecting XP12000/XP10000 Disk Arrays
- Connecting XP1024/XP128 Disk Arrays
- Connecting XP512/XP48 Disk Arrays
- Connecting HP 200 Storage Virtualization System as external storage
- Connecting EVA arrays
- Connecting Thunder 9500V subsystems
- B Required volume capacity for emulation types
- C Adjusting volume capacity for copy pair setting
- D Using an XP12000/XP10000/SVS200 with an EVA3000/5000 external storage
- E Configuring MSA1000/1500 as external arrays
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 192 |
| Size: | 2.41 MB |
Show table of contents
Document Outline
- XP External Storage Software User Guide
- Contents
- 1 Overview of connecting external arrays
- 2 Preparing for XP External Storage operations
- Supported storage platforms and firmware
- Prerequisites
- System requirements
- XP External Storage requirements
- Installing XP External Storage
- Preparing for XP External Storage settings
- Powering arrays on or off
- Using mapped external LUs from the host connected to the local array
- Uninstalling XP External Storage
- Limitations on XP External Storage operations
- Combining XP External Storage with other HP StorageWorks products
- 3 Managing cache with external storage
- 4 XP External Storage panes
- 5 Configuring external LUs
- Overview of configuring external LUs
- Setting an external array's port
- Setting a local array's port attributes
- Discovering and Mapping LUs
- Setting alternate paths for external LUs
- Adding alternate paths by selecting multiple external LUs (Add Paths)
- Deleting alternate paths by selecting multiple external LUs (Delete Paths)
- Checking an external LU's status (LDEV Information)
- Disconnecting external arrays or LUs
- Checking the connection status and resuming external LU operations (Check Paths & Restore Vol.)
- Restoring external LUs (LDEV Restore)
- Changing the cache mode setting of the external LU
- Changing the cache mode of all external LUs in an external array
- Changing the cache mode of an individual external LU
- Stopping the use of paths to an external LU by specifying an external array's WWN (Disconnect Paths)
- Restoring paths to an external LU by specifying an external array's WWN (Check Paths)
- Changing an external array's port setting
- Stopping the use of paths to an external LU by specifying a local array's port (Disconnect Paths)
- Restoring paths to an external LU by specifying a local array's port (Check Paths)
- Deleting external LU mappings (Delete LU)
- 6 Troubleshooting NAS Blade systems that include external arrays
- 7 Remote command devices
- 8 Troubleshooting XP External Storage
- 9 Support and other resources
- A Notes on connecting external arrays
- Connecting Thunder 9500V subsystems
- System parameters for connecting Thunder 9500V subsystems
- Relationship between serial number and array model of Hitachi Thunder 9500V subsystem
- Relationship between the WWN of the port on the Thunder 9500V subsystem and the controller
- Path status and examples of recovery procedures (Thunder 9500V subsystems)
- Connecting TagmaStore AMS and TagmaStore WMS subsystems
- System parameters for connecting TagmaStore AMS and TagmaStore WMS subsystems
- Relationship between serial numbers in device list on the LU operation panel and TagmaStore AMS and TagmaStore WMS subsystem models
- Relation between the WWN of the port on the TagmaStore AMS or TagmaStore WMS subsystem and controller
- Path status and examples of recovery procedure (TagmaStore AMS and TagmaStore WMS subsystems)
- Notes When Power Saving Feature is Used (For TagmaStore AMS Subsystem, TagmaStore WMS Subsystem)
- Connecting XP24000/XP20000 Disk Arrays
- Connecting XP12000/XP10000 Disk Arrays
- Connecting XP1024/XP128 Disk Arrays
- Connecting XP512/XP48 Disk Arrays
- Connecting HP 200 Storage Virtualization System as external storage
- Connecting EVA arrays
- System parameter settings for connecting EVA arrays
- Identifying logical volumes of EVA arrays (using Characteristic 2)
- Alternate path's behavior when an EVA array is connected
- System parameter settings for connecting Sun StorEdge 6120/6320
- System parameter settings for connecting Sun StorageTek FlexLine 380
- System parameter settings for connecting Sun StorageTek 2540
- Alternate paths for connecting Sun StorageTek V2X2
- Connecting EMC CLARiiON CX Series
- Notes on Connecting EMC CLARiiON CX Series
- System Parameter for Connecting EMC Symmetrix Series
- System parameter settings for connecting IBM DS4000 Series
- Alternate Path Mode for Connecting IBM DS8000 Series
- Non-HP arrays
- Connecting Thunder 9500V subsystems
- B Required volume capacity for emulation types
- C Adjusting volume capacity for copy pair setting
- Index