HP XP External Storage Software - Manual (Page 126)

380
Table 35 System Parameter Settings for Connecting Sun StorEdge 6120/6320
Parameter Parameter Setting
port host SUN
System Parameter Settings for Connecting StorageTek FlexLine
When you connect a StorageTek FlexLine 380 as an external storage system, set the system parameters
of the StorageTek FlexLine 380 according to the following table. For the system parameters that are
not in the following table, see the manuals of the StorageTek FlexLine 380 and set the parameters
appropriately for the connecting configuration.
Table 36 System Parameter Settings for Connecting StorageTek FlexLine 380
Parameter Parameter Setting
host type Windows Non-clustered (DMP Support)
System Parameter Settings for Connecting CLARiiON CX600
When you connect a CLARiiON CX600 as an external storage system, set the system parameters of
the CLARiiON CX600 according to the following table. For the system parameters that are not in the
following table, see the manuals of the CLARiiON CX600 and set the parameters appropriately for
the connecting configuration.
Table 37 System Parameter Settings for Connecting CLARiiON CX600
Parameter Parameter Setting
Initiator Type CLARiiON Open
Failover Mode 2
Non-HP Storage Systems
Generally, when you connect a non-HP storage system as the external storage system, the non-HP storage
system port must be configured as a target attached to a Windows host. The third-party vendor should be
contacted as necessary for the technical details to accomplish this.
126 Connecting External Storage Systems