HP StorageWorks XP Remote Web Console Software - Manual (Page 95)

If you select Port, the DKC Operation window displays information about ports on the local
storage system.
•
Tree: Lists either of the following items:
remote storage systems ◦
◦ channel adapters on the local storage system and port attributes
•
List: Displays one of the following items:
detailed information about remote storage systems ◦
◦ detailed information about logical paths
◦ detailed information about ports on the local storage system
•
Preview: Displays changes that have been made in the window. When you change settings
in the window, the changes will be displayed in the Preview list before the changes are applied
to storage systems. If you are sure that information in the Preview is correct, select the Apply
button to apply the settings that you have made.
•
Operation: Indicates the operation in progress in the DKC Operation window.
•
Apply: Applies settings in the Preview box to the storage systems.
•
Cancel: Cancels the settings displayed in the Preview box.
The information on the DKC Operation window will be updated when you do one of the following:
1. Select another tab and then reselect the DKC Operation tab.
2. Click File, Refresh on the menu bar of the XP Remote Web Console main window.
3. Select the Apply button.
4. Select modify mode when you are in view mode.
5. Close the DKC Status window.
Displaying Information about Remote Storage Systems
To display information about remote storage systems:
1. Display the DKC Operation window.
2. In the Display box, select DKC.
The tree and the list display remote storage systems.
DKC Operation Window 95