HP StorageWorks XP Remote Web Console Software - Manual (Page 165)

Status Change by RCU(Suspend Pair Start): The status of the data volume pair was changed
because an operation for splitting a pair started at the secondary storage system.
Status Change by RCU(Suspend Pair Complete): The status of the data volume pair was
changed because an operation for splitting a pair finished at the secondary storage
system.
Status Change by RCU(Suspend to Simplex; Delete Pair Start): An operation for releasing
a pair has been started at the secondary storage system. The status of the data volume
pair will change from Suspend to Simplex.
Status Change by RCU(Pending to Simplex; Delete Pair Start): An operation for releasing
a pair has been started at the secondary storage system. The status of the data volume
pair will change from Pending to Simplex.
Status Change by RCU(Duplex to Simplex; Delete Pair Start): An operation for releasing
a pair has been started at the secondary storage system. The status of the data volume
pair will change from Duplex to Simplex.
Status Change by RCU(Delete Pair Complete): The status of the data volume pair was
changed because an operation for releasing a pair finished at the secondary storage
system.
Ready for Delta resync: A data volume pair became ready for delta resync.
Ready for Delta resync(Failure): The failure occurred with the data volume pair which was
ready for delta resync.
Status Change for Delta resync: The status of the primary data volume was changed to
Hold because of a delta resync operation.
Status Change by MCU(Simplex to Hold): The status of the data volume pair was changed
from Simplex to Hold because of an operation from the primary storage system.
Status Change by MCU(Hold to Duplex): The status of the data volume pair was changed
from Hold to Duplex because of an operation from the primary storage system.
Status Change by MCU(Hold to Pending): The status of the data volume pair was changed
from Hold to Pending because of an operation from the primary storage system.
Status Change by MCU(Hold to Simplex): The status of the data volume pair was changed
from Hold to Simplex because of an operation from the primary storage system.
Status Change by RCU(Hold to Simplex, Delete Pair Start): An operation for releasing a
pair has been started at the secondary storage system. The status of the data volume pair
will change from Hold to Simplex.
Status Change to Hold: The status of the secondary data volume was changed to Hold
because of a delta resync operation.
Unknown: The storage system could not identify the type of the operation.
◦ JNL Group: The journal group number.
◦ Mirror ID: The mirror ID.
◦ VOL: The volume manipulated during the operation. This volume is located in the local
storage system.
The number to the left of the colon (:) is the CU number. The number to the right of the
colon is the LDEV number.
◦ Paired VOL: The volume paired with the manipulated volume. This volume is located in
the remote storage system.
The number to the left of the colon (:) is the CU number. The number to the right of the
colon is the LDEV number.
History Window 165