HP StorageWorks XP Remote Web Console Software - Manual (Page 107)

Figure 53 DKC Status Window
The DKC Status window displays the following:
•
List:
No.: displays serial numbers used for rows in the list ◦
◦ Path Status: indicates status of a logical path (For details, see Table 25 (page 107) )
◦ Port: indicates a port on the local storage system
◦ Pair-Port: indicates a port on the remote storage system.
•
S/N: indicates the serial number and LDKC number of the remote storage system.
•
Controller ID: displays the controller ID (model name that indicates the model) of the remote
storage system.
•
Path Gr. ID: indicates a path group ID.
•
M-R Path: indicates the type of channel interface between the local and the remote storage
systems. This column displays fibre.
•
Minimum Paths: Indicates the minimum possible number of paths between the local and the
remote storage systems.
•
RIO MIH Time: indicates the RIO MIH timer value, which is the wait time until data transfer
from the local storage system to the remote storage system is complete.
•
DKC Registered: Indicates the date and time when the local and the remote storage systems
are associated to each other.
•
Last Updated: indicates the date and time when the last operation on a logical path to the
remote storage system was performed.
•
Refresh the DKC Operation tab after this panel is closed: If you select this check box, information
in the DKC Operation window will be refreshed after you close the DKC Status window.
•
Refresh: refreshes the information in the DKC Status window.
•
Close: closes the DKC Status window.
Table 25 Logical Path Status
Remarks Status
This path has been successfully established and can be used for URz remote
copy activities. Normal
An operation for configuring or deleting this logical path is in progress. Nothing
Viewing the Status of Logical Paths 107