Dwyer UXF3 - Manual (Page 68)

- 64 -
Table 9-19 < Maintenance/setting >
Item Content
AO adjustment When 4mA is selected, without decimal point, Enter in the range from 1 to 28592.
When 20mA is selected, without decimal point, Enter in the range from 28592 to 65534.
AO check Without decimal point, Enter in the range from -20 to 120%.
DO check Select ON or OFF.
DO total pulse check Without decimal point, Enter in the range from 1 to 100 Pulse/s.
Test mode Check the check box ( ;) to enter the test mode.
Exit the test mode if either input data or tracking time is entered and the check box is blank
(
†).
Input data Without decimal point, Enter in the ±120% range.
Tracking time Without decimal point, Enter in the range from 0 to 900 sec.
Bulletin F-107-UXF3-S