Dwyer UXF3 - Manual (Page 59)

- 55 -
9.13 Measurement
Click the “MEASURE” button on the Menu screen, and the following screen appears.
Fig. 9-20 < Measure screen >
Select Instantaneous value from Flow rate, Flow rate% and velocity first.
Then click the [SRART] button, and the value is read-in, and the flow rate, flow rate %, velocity, RAS, + Total, +
Total pulse, – Total, and – Total pulse are updated in the specified cycles. The trend is also displayed. (Time of
collection is displayed on the X-axis, and the data is deleted and time shifted when specified number of points is
reached, allowing the latest value to be viewed.) The vertical axis is displayed in specified Y scale.
See Table 9-16 for details of measurement.
[Start]...........................Starts measuring.
[Stop] ...........................Stops measuring.
[Save as CSV] .............Saves the measurement result in a file in CSV format. Click the button, and you are
prompted to enter the name of a file to which the data is to be saved. Specify the
destination to save and enter the file name, and a CSV file is created.
Note: The maximum number of data that can be saved is 65530. If read-in is attempted exceeding 65530, the
oldest data is deleted and the newest data is saved as the 65530th data.
1 Up to 65530 data Exceeding 65530 Data sort
2 Oldest data Delete Oldest data
Data (n–65529) Data (n–65529)
65529 Data (n–1)
65530 Newest data Newest data (n) Newest data (n)
Read-in data
Bulletin F-107-UXF3-S