Dwyer UXF3 - Manual (Page 48)

- 44 -
9.7 Process Setting
Click the “PROCESS SETTING” button on the Menu screen, and the following screen appears.
Fig. 9-14 < Process setting screen >
To select an item to be set or read, set the relevant check box to ON ( ;). Not to select (or to reset the selection),
set the relevant check box to OFF ( †). If “Other” is selected as pipe material, pipe sound velocity becomes valid.
For details of “Process setting,” refer to Tables 9-4 and 5 on the next page.
Ɣ Pipe material: Items other than PIPE S.V.
Display invalid................... PIPE S.V.
Ɣ Pipe material: PIPE S.V.
Display valid...................... PIPE S.V.
Ɣ Lining material: Without lining
Display invalid................... LINING S.V., LINING THICKNESS
Ɣ Lining material: Without lining, Items other than LINING S.V.
Display
valid...................... LINING THICKNESS
Display invalid................... LINING S.V.
Ɣ Lining material: LINING S.V.
Display valid...................... LINING S.V., LINING THICKNESS
Ɣ Kind of fluid: For items other than FLUID S.V.
Display invalid................... FLUID S.V.
Ɣ Kind of fluid: FLUID S.V.
Display valid...................... FLUID S.V.
Bulletin F-107-UXF3-S