Dwyer UXF3 - Manual (Page 34)

- 30 -
7.2.3 Word data [Read-out only]: Function code [04H]
Relative
address
Register
No.
Data
type
Parameter Read-out data/Write-in data setting range Remarks
3XXXX
0000 30001 float Velocity
Metric system: 32-bit floating data, Unit: m/s
English system: 32-bit floating data, Unit: ft/s
0004 30005 float Flow rate 32-bit floating data Unit: Flow rate
0008 30009 float Flow rate % 32-bit floating data, Unit: %
000C 30013 double + Total value 64-bit floating data Unit: Total
0014 30021 double Total value 64-bit floating data
001C 30029 long + Total pulse No decimal point, Unit: Pulse
0020 30033 long Total pulse No decimal point, Unit: Pulse
0024 30037
unsigned
int
RAS information Data of hexadecimal number
0026 30039 int Not use
0028 30041 int Not use
002A 30043 int Not use
002C 30045 int Not use
002E 30047 int Not use
0030 30049 int Wedge S.V.
Metric system: No decimal point, Unit: m/s
English system: No decimal point, Unit: ft/s
0032 30051 int Wedge incidence angle 1 place after decimal point, Unit: º
0034 30053 int Pipe S.V.
Metric system: No decimal point, Unit: m/s
English system: No decimal point, Unit: ft/s
0036 30055 int Pipe incidence angle 1 place after decimal point, Unit: º
0038 30057 int Lining S.V.
Metric system: No decimal point, Unit: m/s
English system: No decimal point, Unit: ft/s
003A 30059 int Lining incidence angle 1 places after decimal point, Unit: º
003C 30061 int Fluid S.V.
Metric system: No decimal point, Unit: m/s
English system: No decimal point, Unit: ft/s
003E 30063 int Water incidence angle 1 place after decimal point, Unit: º
0040 30065 int Propagation time (T0 C) No decimal point, Unit: Ps
0042 30067 int Window open (Win C) No decimal point, Unit: Ps
0044 30069 long Positive direction time (T1) 3 place after decimal point, Unit: Ps
0048 30073 long Backward direction time (T2) 3 place after decimal point, Unit: Ps
004C 30077 long Propagation time (T0) 3 place after decimal point, Unit: Ps
0050 30081 long Propagation time difference (DT) 4 place after decimal point, Unit: ns
0054 30085 long Delay time (Ta) 3 place after decimal point, Unit: Ps
0058 30089 long Water incidence angle ( Tf) 3 place after decimal point, Unit: º
005C 30093 long Fluid S.V. (Cf)
Metric system: 1 places after decimal point,
Unit: m/s
English system: 1 places after decimal point,
Unit: ft/s
0060 30097 long Reynolds number (Re) No decimal point
0064 30101 long
Flow profile compensation factor
(K)
4 places after decimal point
0068 30105 long Mean velocity (V)
Metric system: 3 places after decimal point,
Unit: m/s
English system: 3 places after decimal point,
Unit: ft/s
006C 30109 int U: Signal strength (AGC U) 2 places after decimal point, 0.00 to 100.00%
006E 30111 int D: Signal strength (AGC D) 2 places after decimal point, 0.00 to 100.00%
0070 30113
unsigned
int
U: Maximum signal value (P/H U) No decimal point
0072 30115
unsigned
int
D: Maximum signal value (P/H D) No decimal point
0074 30117 int U: Trigger level (TRG U) 2 places after decimal point, 0.00 to 100.00%
0076 30119 int D: Trigger level (TRG D) 2 places after decimal point, 0.00 to 100.00%
0078 30121 long
U: Maximum signal value (after
filter)
No decimal point
007C 30125 long
D: Maximum signal value (after
filter)
No decimal point
0080 30129 long Sensor spacing 1
Metric system: 2 places after decimal point,
Unit: mm
English system: 3 places after decimal point,
Unit: inch
Bulletin F-107-UXF3-S