Maintenance, 16 maintenance – Dwyer UXF3 User Manual
Page 67
- 63 -
9.16 Maintenance
Click the “MAINTENANCE” button on the Menu screen, and the following screen appears.
Note: If [Setting] and [Read] are executed on this screen, the instrument is in the Maintenance mode for flowmeter.
Be sure to reset the Maintenance mode of flowmeter by clicking the [Release] button.
Fig. 9-25 < Maintenance screen >
Select the items to be set or read-in by checking the check box of the desired items (
;). Make the check box of the
items not to be selected (or to be canceled) blank (
).
See Table 9-19 on the next page for details of the maintenance.
[Setting] button............Sends the setting of the selected items (
;) and reflects the response value to the setting.
[READ] button ............Read-ins the setting of the selected items (
;) and reflects the response value to the setting.
[Save] button ...............Reflects the setting sent by pressing the [Setting] button to the flow transmitter. Note that
AO check, DO check, total pulse check, test mode, input data, and tracking time are not
saved. Be sure to click the [Save] button if AO is adjusted.
[TEST Cancel] button..Cancels the AO/DO/Test mode.
* Be sure to press the [TEST Cancel] button when maintenance is completed.
Bulletin F-107-UXF3-S