Dwyer UXF3 - Manual (Page 50)

- 46 -
9.8 Range Setting
Click the “RANGE” button on the Menu screen, and the following screen appears.
Fig. 9-15 < Range setting screen >
To select an item to be set or read, set the relevant check box to ON ( ;). Not to select (or to reset the selection),
set the relevant check box to OFF ( †). For details of “Range setting,” refer to Tables 9-6 to 9-10 on the next page.
Ɣ Type: in case of single range;
Display Valid ..................... Full scale 1
Display Invalid................... Full scale 2 and histeresis
Ɣ Type: in case of automatic 2-range, forward and reverse range, forward and reverse automatic 2-range
Display Valid ..................... Full scale 1, full scale 2 and histeresis
Display Invalid................... None
[Setting]....................... Sends the setting of the selected item (check box set to ON ( ;)), reflecting the response
value on the setting.
[READ] ....................... Reads the setting of the selected item (check box set to ON ( ;)), reflecting the response
value on the setting.
[Save] .......................... Reflects the setting sent by pressing the [Setting] button on the flow transmitter. Be sure to
press the [Save] button if the setting is changed.
[Check ON/OFF]......... Set the check box to ON to select all the items (to set all the check boxes to ON ( ;)). Set
the check box to OFF ( †) to release the selection of all the items (to set all the check boxes
to OFF ( †)).
Bulletin F-107-UXF3-S