GW Instek GDS-3000 Series Programming Manual - Manual (Page 98)

GDS-3000 Programming Manual
98
:GONogo:EXECute
Set
Query
Description Enables or disables the Go/NoGo function or
queries its state.
Syntax :GONogo:EXECute {OFF|ON|?}
Parameter/ OFF Disabled
Return Parameter ON Enabled
Example :GONogo:EXECute OFF
Turns Go/NoGo off.
:GONogo:FUNCtion
Set
Description Initializes the Go/NoGo APP. This must be run
after the Go/NoGo APP has been started.
Syntax :GONogo:FUNCtion
:GONogo:NGCount
Query
Description Returns the Go/NoGo counter.
Syntax :GONogo:NGCount {?}
Return parameter Returns a string in the following format “number of
violations,total tests”
Example :GONogo:NGCount?
> 3,25
Indicates that 3 violations occurred over 25 tests.
:GONogo:NGDefine
Set
Query
Description Sets the Go/NoGo “When” conditions.
Syntax :GONogo:NGDefine {EXITs|ENTers|?}