GW Instek GDS-3000 Series Programming Manual - Manual (Page 8)

GDS-3000 Programming Manual
8
Background The Ethernet interface is used for remote control
over a network and to retrieve the scope’s screen
shot, system information etc,. Please note that the
all GDS-3000 series were designed with a build-in
web server.
Panel operation 1. Press the Utility key.
Utility
2. Press I/O from the bottom menu.
3. Press Ethernet from the side menu.
4. Set DHCP/BOOTP to On or Off
from the side menu.
Note
IP addresses will automatically be assigned with
DHCP/BOOTP set to on. For Static IP Addresses,
DHCP/BOOTP should be set to off.