GW Instek GDS-3000 Series Programming Manual - Manual (Page 71)

COMMAND DETAILS
71
Example :MEASure:SOURce1 CH 1
:MEASure:SOURce2 CH 2
:MEASure:LFRDelay?
-9.99E-6
Select channel 1 and 2 as delay source1/2, and
then measure LFR.
:MEASure:LFFDelay
Query
Description Returns the delay between the first falling edge of
source1 and the last falling edge of source2.
Syntax :MEASure:LFFDelay{?}
Return parameter Returns the LFF delay as
Note Select the two source channels before entering this
command.
Example :MEASure:SOURce1 CH 1
:MEASure:SOURce2 CH 2
:MEASure:LFFDelay?
-9.99E-6
Select channel 1 and 2 as delay source1/2, and
then measure LFF.
:MEASure:PHAse
Query
Description Returns the phase between source 1 and source 2.
Syntax :MEASure:PHAse{?}
Return parameter Returns the phase as
Note Select the two source channels before entering this
command.