GW Instek GDS-3000 Series Programming Manual - Manual (Page 69)

COMMAND DETAILS
69
Example :MEASure:SOURce1 CH 1
:MEASure:SOURce2 CH 2
:MEASure:FRRDelay?
-8.56E-6
Select channel 1 and 2 as delay source1/2, and
then measure FFR.
:MEASure:FFFDelay
Query
Description Returns the delay between the first falling edge of
source1 and the first falling edge of source2.
Syntax :MEASure:FFFDelay{?}
Return parameter Returns the FFF delay as
Note Select the two source channels before entering this
command.
Example :MEASure:SOURce1 CH 1
:MEASure:SOURce2 CH 2
:MEASure:FFFDelay?
-8.89E-6
Select channel 1 and 2 as delay source1/2, and
then measure FFF.
:MEASure:LRRDelay
Query
Description Returns the delay between the first rising edge of
source1 and the last rising edge of source2.
Syntax :MEASure:LRRDelay{?}
Return parameter Returns the LRR delay as
Note Select the two source channels before entering this
command.