GW Instek GDS-3000 Series Programming Manual - Manual (Page 33)

COMMAND DETAILS
33
*RCL
Set
Description Recalls a set of panel setting.
Syntax *RCL {1 | 2 | 3 |…. | 20}
Example *RCL 1
Recalls setup from set 1.
*RST
Set
Description Resets the GDS-3000 (recalls the default panel
settings).
Syntax *RST
*SAV
Set
Description Saves the current setup to setup file number 1~20.
Syntax *SAV {1 | 2 | 3 |…. | 20}
Example *SAV 1
Sets current setup to set 1.
Acquisition Commands
:ACQuire:AVERage ...................................................... 33
:ACQuire:MODe ......................................................... 34
:ACQuire:MEMory? ............................................... 34
:ACQuire:STATe? .................................................. 35
:ACQuire:AVERage
Set
Query
Description Selects or returns the number of waveform
acquisitions that are averaged in the average
acquisition mode.