GW Instek GDS-3000 Series Programming Manual - Manual (Page 77)

COMMAND DETAILS
77
Timebase Commands
:TIMebase:POSition ................................................... 77
:TIMebase:SCALe ........................................................ 77
:TIMebase:MODe ....................................................... 77
:TIMebase:WINDow:POSition ................................... 78
:TIMebase:WINDow:SCALe ....................................... 79
:TIMebase:POSition
Set
Query
Description Sets or queries the horizontal position.
Syntax :TIMebase:POSition { | ?}
Parameter Horizontal position
Return parameter Returns the horizontal position as
Example :TIMebase:POSition 5.00E-4
Sets the horizontal position as 500us.
:TIMebase:SCALe
Set
Query
Description Sets or queries the horizontal scale.
Syntax :TIMebase:SCALe { | ?}
Parameter Horizontal scale
Return parameter Returns the horizontal scale as
Example :TIMebase:SCALe 5.00E-2
Sets the horizontal scale to 50ms/div.
:TIMebase:MODe
Set
Query
Description Sets or queries the time base mode. The time base
mode determines the display view window on the
scope.